Epifanes Classic Dutch Mahogany, MHS500

  • $21.89
  • Save $8.06


Air shipping is not available.

Product Description:

Epifanes Classic Dutch Mahogany Stain (MHS500) is specifically designed to penetrate bare mahogany and other fine marine woods.

This quick drying stain renders a beautiful warm, rich reddish-brown mahogany color. Depending on desired finished look, each coat will continue to darken the color of the stain; a maximum of 3 coats may be applied to bare.

Use on both interior and exterior woodwork above the waterline. Recoatable after only 2 hours at 65°F. Dutch Mahogany Stain is recoatable with all Epifanes 1 and 2-part varnishes.

It is possible to mix Dutch Mahogany Stain (maximum 10%) with Epifanes 1 and 2-part varnishes (e.g. Epifanes Gloss Varnish) to create a lightly tinted finish for camouflaging color differences in an existing system. Do not thin this product.

Available in 500ml sizes. Buy two cans and save even more!

Features and Benefits:

  • Quick drying, impregnating stain
  • Renders a warm, rich reddish-brown mahogany color
  • Recoatable after only 2 hours at 65°F
  • Use on Mahogany and other find hardwoods, interior and exterior above the waterline
  • Depending on desired finished look, each coat will continue to darken the color of the stain
  • Recoatable with all Epifanes 1 and 2-part varnishes
  • May mix Dutch Mahogany Stain (max 10%) with Epifanes 1 & 2-part varnishes to create a lightly tinted finish for camouflaging color differences in an existing system

Technical Information:

Type One-component stain
Color Warm, rich reddish-brown mahogany color
Recommended Uses Specifically formulated for mahogany and fine marine woods, both interior and exterior above the waterline. 
Container Size 500 ml
Coverage 50-75 square feet, depending on wood porosity and density
Surface Prep Clean wood and sand with 180 to 220 grit sandpaper. Degrease surface thoroughly with Epifanes Spray Thinner for Paint & Varnish or other suitable degreaser and allow to dry thoroughly; do not use water.
Application Brush or roller, apply in thin coats, moving in direction with the wood grain
Drying times at 65F / 65% RH Recoatable after 2 hours
Application Conditions Temperature should be between 50F. and 85F. during application. Air humidity below 85%. Avoid staining in direct sun or hot conditions. Do not thin. Clean wood and sand with 180 to 220 grit sandpaper. Degrease surface thoroughly with Epifanes Spray Thinner for Paint & Varnish or other suitable degreaser and allow to dry thoroughly; do not use water.

Related Products: