Epifanes Woodfinish Matte, WFM Series
Air shipping is not available.
Epifanes Woodfinish Matte (WFM) provides a rich low gloss matte finish with a clear amber color and has the appearance of being hand rubbed. Suitable for both interior and exterior woods, particularly teak and fine hardwoods.
With Woodfinish Matte there is no sanding between coats if re-coated within 72 hours. The perfect labor savings alternative to traditional varnish!
Made from urethane-alkyd resins, tung oil and UV inhibitors. Offers excellent flow, durability, scratch resistance and exterior weather resistance. Outstanding U.V. protection for teak and other fine hardwoods.
Available in 500 ml or 1000 ml sizes.
Features and Benefits:
- Rich matte finish with a clear amber color offers hand-rubbed appearance
- U.V. absorbers provides long lasting beautiful rich protection
- Eliminates sanding between coats!
- Suitable for both interior and exterior woods, particularly teak and hardwoods
- Excellent flow, durability, scratch resistance and exterior weather resistance
- Best when applied over several coats of Epifanes Gloss Varnish, Woodfinish Gloss or Polyurethane Clear Gloss
Technical Information (Data Sheet PDF Here):
|Type||One-component varnish alternative based on phenolic-modified alkyd resins and tung oil.|
|Color||Opaque in the can. Dries clear amber.|
|Gloss||Matte with some sheen|
|Recommended Uses||Specifically formulated for oily woods like teak and iroco. For long lasting protection of all marine or household woods. Interior and exterior wood above the waterline. Best when applied over several coats of Epifanes Gloss Varnish, Epifanes Woodfinish Gloss or Epifanes Polyurethane Clear Gloss.|
|Film Characteristics||Rich matte finish. Hand rubbed appearance. Superior flow and durability. Good scratch and exterior weather resistance. Contains UV absorbers. If recoated within 72 hours, does not require sanding.|
|Container Size||500 ml, 1000 ml|
|Solids Content||40 +/- 2 vol. %|
|Recommended Film Thickness||Per coat wet - 60 micron
Per coat dry - 25 micron
|Application||Brush, roller, conventional air spray, H.V.L.P., airless.|
|Drying times at 65F / 65% RH||Tack free - 1 hour Tape free - 24 hours
Dry - 12 hours Recoatable - 12 hours
|Spray Application||Conventional air: Thin as needed up to 15% with Epifanes Spray Thinner for Paint & Varnish. Spray viscosity 20 - 24 seconds Din Cup 4, 16 - 20 seconds Ford Cup 4. Nozzle 1.5 mm. - 1.8 mm. Pressure 2 - 3 Bar.|
|Additives||Epifanes Accelerator, Epifanes Retarder|
|Application Conditions||Temperature should be between 50F. and 85F. during application. Air humidity below 85%. Avoid varnishing in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability. Add thinner up to the specified percentage to compensate for the faster release of solvents. Epifanes Woodfinish Matte is compatible with most other types of one-component alkyd or urethane based varnishes and over two-component varnishes. Any existing finish must be intact, degreased and sanded prior to recoating. Always stir Epifanes Woodfinish Matte prior to use.|
Download Technical Data Sheet PDF by clicking here