Farecla G3 Ultra Abrasive Compound

  • $33.49
  • Save $3.46


Farecla Logo         

Note: Farecla G3 Ultra has been discontinued and replaced with new Farecla G3 Premium Abrasive Compound

Product Overview:

Introducing Farecla's new revolutionary breakthrough paint finishing technology, G3 Ultra Abrasive Compound featuring Farecla's unique Fluid Dynamic Technology®. 

G3 Ultra is the best choice for newer model vehicles using today's ultra high solid, scratch resistant and ceramic coatings.

G3 Ultra offers a step change improvement in speed and quality of finish, permanently removing P1,500 or finer sanding marks from all modern paint systems. G3 Ultra achieves the deepest gloss in the fastest time possible, resulting in dramatically significant labor savings.

Use with a Farecla G-Mop Lambswool Pad or Fast Cut White Foam Compounding Pad for best results.

On dark colors, follow with G3 Fine Finishing Compound as an optional second finishing step to remove holograms, swirl marks and bring out an even deeper wet gloss look.

G3 Ultra Features and Benefits:

Features Benefits
Fastest Ever Cutting Action Removes up to P1,500 sanding marks from paintwork 30% to 40% faster than the nearest competitor*
Permanent Gloss Finish No rework. Scratches are permanently removed leaving an ultimate gloss finish
Superior Emulsion System Increased lubrication allows compound to work for longer without drying out
Simple and Easy To Use Forgiving performance makes excellent results achievable for even inexperienced operatives
Silicone Free, Low VOC, Safe Water-based formulation has a pleasant odor and is safe in contact with skin

Uses:

  • New Ultra High Solids and Scratch Resistant Clear Coats
  • High Solid Paints
  • Jobbers looking to achieve the deepest gloss in fastest time possible

Videos:

G3 Ultra Training Video

*Note, for USA, use a Farecla 8" Lambswool or Fast Cut White Foam Compounding Pad in place of yellow foam.

The Science Behind Fluid Dynamic Technology®

The abrasive particles used in Farecla G3 Ultra System were specially engineered to combine the cutting and polishing phases required for compounding, into one efficient, high performance process.

As the compounding process begins, these particles collide with the paint surface, cutting away at the ridges caused by sanding marks and other defects.

It’s at this stage that our superior emulsion system comes into play, optimizing the rate at which each particle breaks down, from the jagged rocks needed for the cutting phase, to smooth, marble-like spheres for polishing.

The speed at which the abrasives diminish is extremely important. Enough time is needed to ensure that the sanding marks are completely removed, yet the whole process must be complete in the fastest possible time, with no compromise in the final finish.

The experience and dedication of Farecla's product development chemists has lead to a unique interaction between the abrasive particles in our compounds and the emulsion system in which they are suspended. This is Fluid Dynamic Technology® and ultimately, the reason that our G3 Ultra System provides you with the finest finish in the fastest ever time.


Related Products:

Farecla White Foam Waffle Compounding Pad Farecla G-Mop Lambswool Soft Polishing Buff Pad

Premium Micorfiber Finishing Towel Wipes

Farecla G3 Fine
Farecla Wax Top Liquid Polish  Farecla Profile Polymer Wax

Processing Charts:

  • Click here for G3 Ultra and Fine Processing Chart

MSDS:

  • Click here for G3 Ultra MSDS