Epifanes Bilge Paint, Gray, 2000ml, BPG.2000
Air shipping is not available, please select ground or discount shipping at checkout.
Product Description
Epifanes Gray Bilge Paint 2000ml (BPG.2000) is a durable, one‑component protective coating designed for bilge spaces, engine rooms, chain lockers, and other interior areas where a tough, moisture‑resistant paint system is essential.
Formulated for use on steel, wood, fiberglass (GRP), and aluminum when paired with the appropriate Epifanes one‑component primer. This coating provides excellent adhesion, impact resistance, and long‑term protection in demanding marine environments.
Easily applied by brush, roller, or spray for smooth, even coverage.
Available in White and Gray colors, in both 750ml and 2000ml sizes.
Features & Benefits
- Tough, protective coating ideal for bilges, engine rooms, lockers, and other wet interior spaces.
- Compatible with steel, wood, fiberglass, and aluminum when used with Epifanes one‑component primers.
- Semi‑gloss finish for clean, bright interior surfaces.
- Applies smoothly by brush, roller, or spray.
- Available in White and Gray.
Product Composition
- Type: Air‑drying, one‑component coating
- Base: Modified alkyd resin
- Gloss Level: Semi‑gloss
- Solids Content: 50–55% by volume
- VOC Level: 347 g/L
- Density: 1.27 g/cm³ @ 20°C
Drying Times (at 65% RH)
| Temperature | Dust Dry | Recoatable |
| 50°F | 4 hours | 48 hours |
| 59°F | 3 hours | 36 hours |
| 68°F | 2 hours | 24 hours |
| 77°F | 1.5 hours | 18 hours |
Drying times depend on ventilation and film thickness. Horizontal surfaces and thicker coats may require additional time. Do not apply wet‑on‑wet.
Application Conditions
- Temperature: 47°F–86°F
- Relative Humidity: 50%–85%
- Avoid direct sunlight and strong wind
- Maximum 5°F difference between paint and substrate
- Do not apply excessive wet film thickness
Spray Application Guidelines
- Thinning: 10–15%
- Nozzle Size: 1.5–1.8 mm
- Pressure: 2–3 Bar
- Viscosity: 20–24 seconds (DIN‑cup 4mm)
Surface Preparation
- Fiberglass (GRP): Clean and degrease, sand P220–240, apply 1–2 primer coats.
- Wood: Clean, sand P220–240, apply 1–2 primer coats.
- Steel: Clean, remove corrosion, sand P60, apply 3 primer coats.
- Aluminum: Clean, degrease, apply 1–2 primer coats.
Compatible Primers
- Epifanes Multi Marine Primer
- Epifanes Washprimer AQ (for new aluminum)
Compatible Topcoats
- Epifanes Mono‑urethane Yacht Paint
- Epifanes Poly‑urethane Paint
- Epifanes Yacht Enamel
- Epifanes Non‑Skid Deck Coating
- Epifanes Nautiforte Yacht Paint
Technical Information
Download the technical data sheet here.
| Colors: | White and Gray, semi‑gloss |
| Container Sizes: | 750ml and 2000ml |
| Coverage: | 10m² (107ft²) per liter @ 40µm dry film thickness |
| Application: | Brush, roller, or conventional air spray |
| Thinner: | Epifanes Brush Thinner or Epifanes Spray Thinner |
| Recommended Film Thickness: | 70–80µm wet = 40–45µm dry |
| Application Conditions: | Recommended temperature: 50°F–85°F |
About SMSDistributors
SMSDistributors.com is an authorized dealer for Epifanes marine coatings, supplying the complete line of Epifanes varnishes, enamels, additives, primers, and specialty finishes. We maintain a deep stocking inventory to ensure fast, reliable shipping for both professional and DIY marine finishing projects.
We also offer custom tinting in-house for Polyurethane, Mono‑urethane, and Yacht Enamel paint systems.
Our focus is on providing accurate technical data, manufacturer‑verified product information, and easy access to the full Epifanes catalog. Customers can reference detailed technical sheets, videos, and how‑to resources to select the right products for their project.
We are committed to delivering genuine Epifanes products, efficient order fulfillment, and a streamlined buying experience.
Category
Epifanes > Bilge Paint