Epifanes Rubbed Effect Satin Finish Interior Varnish, 500ml, RE.500
Air shipping is not available; please select ground or discount shipping at checkout.
Product Description
Epifanes Rubbed Effect Satin Finish Interior Varnish 500ml (RE.500) is a quick‑drying, scratch‑resistant, one‑component interior varnish based on urethane‑alkyd resins. It produces a warm, hand‑rubbed satin sheen and offers excellent resistance to alcohol, household chemicals, scuffing, and abrasion.
Rubbed Effect Varnish is ideal as a satin topcoat in a new varnish system or as a maintenance satin finish over existing varnish. It can be applied over virtually any interior varnish system. For bare wood, always begin with several high‑gloss build coats of a compatible varnish to fill the grain and provide UV protection.
Highly recommended for cabin soles, interior trim, doors, bulkheads, and other interior wood surfaces requiring a durable satin finish.
Available in 500ml and 1000ml size containers. Download Technical Data Sheet here.
Features & Benefits
- Rich hand‑rubbed satin appearance
- Excellent scratch, scuff, and chemical resistance
- Quick drying for efficient interior finishing
- Ideal for cabin soles, trim, and interior woodwork
- Compatible with most Epifanes interior varnish systems
Technical Information
- Type: Oxidative drying
- Base: Urethane/alkyd resin
- Gloss: Satin
- Color: Transparent amber
- Density: 0.910 g/cm³ @ 68°F
- Viscosity: 45 seconds ISO‑cup 4mm
- Solids: 44 ± 2% by volume
- VOC Level: 467 g/L
- Recommended Wet Film Thickness: 2.5 mil (1 mil dry)
- Packaging: 500ml, 1000ml
- Shelf Life: Approx. 3 years (41–86°F, unopened)
Drying Times
| Condition | 50°F | 59°F | 68°F | 77°F |
|---|---|---|---|---|
| Dust Dry | 3 hrs | 2 hrs | 1 hr | 45 min |
| Sandable | 24 hrs | 18 hrs | 12 hrs | 10 hrs |
| Recoatable | 24 hrs | 18 hrs | 12 hrs | 10 hrs |
Note: Drying times depend on ventilation, humidity, and film thickness. Avoid wet‑on‑wet application.
Application Guidelines
- Temperature: 47–86°F
- Humidity: 50–85% R.H.
- Use a long‑haired soft brush or spray; roller application is not advised
- Distribute evenly and tip‑off along the grain
- Avoid retipping and excessive wet film thickness
- Do not varnish in direct sun or strong wind
- If varnish “pulls,” add up to 10% thinner
- Up to 10% Epifanes Mahogany or Teak Stain may be added to adjust color
Spray Application
| Thinning | Nozzle | Pressure | Viscosity |
|---|---|---|---|
| 15–20% | 1.2–1.5 mm | 30–45 psi | 20–24 sec (DIN‑cup 4mm) |
System Build‑Up Example
For bare wood, begin with several coats of Epifanes Clear Gloss Varnish to fill grain and provide UV protection. Most other Epifanes varnish systems are also compatible for system build-up.
| Step | Product | Coats | Thinner | Thinning Ratio | Drying | Sanding |
|---|---|---|---|---|---|---|
| 1 | Epifanes Clear Varnish | 1 | Brush Thinner | 25–50% | 24 hrs | 220G |
| 2 | Epifanes Clear Varnish | 1 | Brush Thinner | 10–25% | 24 hrs | 220G |
| 3 | Epifanes Clear Varnish | 1+ | Brush Thinner | 0–5% | 24 hrs | 320G |
| 4 | Epifanes Rubbed Effect Varnish | 1–2 | Brush Thinner | 0–5% | 12 hrs | 320G |
Recoating Compatibility for Desired Effect
- Epifanes Clear Varnish — High gloss
- Epifanes Woodfinish Gloss — High gloss
- Epifanes Woodfinish Matte — Matte
- Epifanes Aqua Marine Interior Varnish — Satin
- Epifanes Rapidcoat / Rapidclear — Semi‑gloss
SMSDistributors Expert Notes
- For bare wood, always build up with varnish base coats first. Satin finishes should never be used as base coats on bare wood, or you will get an uneven result.
- Great for cabin soles. Rubbed Effect is one of the most durable interior satin finishes available.
- Quick drying. Ideal for interior projects where turnaround time matters.
- Avoid wet‑on‑wet. This varnish must dry fully between coats.
- Spray friendly. Excellent flow‑out when thinned properly.
- Warm satin tone. Adds a rich amber warmth to interior woodwork.
- Sand lightly. 320G by hand or non-woven scuff pad is ideal between coats.
Video
About SMSDistributors
SMSDistributors.com is an authorized dealer for Epifanes marine coatings, supplying the complete line of Epifanes varnishes, enamels, additives, primers, and specialty finishes. We maintain a deep stocking inventory to ensure fast, reliable shipping for both professional and DIY marine finishing projects.
We also offer custom tinting in-house for Polyurethane, Mono‑urethane, and Yacht Enamel paint systems.
Our focus is on providing accurate technical data, manufacturer‑verified product information, and easy access to the full Epifanes catalog. Customers can reference detailed technical sheets, videos, and how‑to resources to select the right products for their project.
We are committed to delivering genuine Epifanes products, efficient order fulfillment, and a streamlined buying experience.
Category
Epifanes > Varnish > Interior Satin Finish