Epifanes Classic Teak Stain, CTS.500
Air shipping is not available.
Product Description:
Epifanes Classic Teak Stain (CTS.500) is a high-quality stain providing a beautiful in-depth warm golden Teak color on wood. It can be used on ageing and patchy timber to create an even tone.
It bonds well to bare wood and existing intact varnish systems and may be used to camouflage discolored/aged wood prior to applying Epifanes varnishes.
This quick drying stain renders a beautiful warm golden teak color. Depending on desired finished look, each coat will continue to darken the color of the stain; a maximum of 3 coats may be applied to bare.
Use on both interior and exterior woodwork above the waterline. Recoatable after only 2 hours at 65°F. Classic Teak Stain is recoatable with all Epifanes 1 and 2-part varnishes.
It is possible to mix Classic Teak Stain (maximum 10%) with Epifanes 1 and 2-part varnishes to create a lightly tinted finish for camouflaging color differences in an existing system. Do not reduce this product.
Available in 500ml size container. Download Tech Data Sheet here.
Features and Benefits:
- Quick drying, impregnating stain
- Renders a beautiful in-depth warm golden Teak color on wood
- Recoatable after only 2 hours at 65°F
- Use on teak and other fine hardwoods, interior and exterior above the waterline
- Depending on desired finished look, each coat will continue to darken the color of the stain
- Recoatable with all Epifanes 1 and 2-part varnishes
- May be mixed (max 10%) with Epifanes 1 & 2-part varnishes to create a lightly tinted finish for camouflaging color differences in an existing system
Technical Information:
| Type | One-component stain |
| Color | Warm, rich golden teak color |
| Recommended Uses | Specifically formulated for mahogany and fine marine woods, both interior and exterior above the waterline. |
| Container Size | 500 ml |
| Coverage | 50-75 square feet, depending on wood porosity and density |
| Surface Prep | Clean wood and sand with 180 to 220 grit sandpaper. Degrease surface thoroughly with Epifanes Spray Thinner for Paint & Varnish or other suitable degreaser and allow to dry thoroughly; do not use water. |
| Application | Brush or roller, apply in thin coats, moving in direction with the wood grain |
| Drying times at 65F / 65% RH | Recoatable after 2 hours |
| Application Conditions | Temperature should be between 50F. and 85F. during application. Air humidity below 85%. Avoid staining in direct sun or hot conditions. Do not thin. Clean wood and sand with 180 to 220 grit sandpaper. Degrease surface thoroughly with Epifanes Spray Thinner for Paint & Varnish or other suitable degreaser and allow to dry thoroughly; do not use water. |