Evercoat Z-Grip Glaze OPTEX Putty, 30 Once, 100567

$22.00
Save $7.95

Product Overview

Evercoat Z-GRIP® Glaze OPTEX® Putty, 30 Once (100567) is a two-part, flowable, polyester finishing putty ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections with patented OPTEX® color-change technology. Can also be used to fill minor body damage up to 1/8” (3 mm) in depth.

Formulated for superior adhesion to galvanized steel and aluminum with no shrinkage. May also be used on sanded body filler, steel, fiberglass, most rigid to semi-rigid plastics, and sanded OEM paint.

Available in 30 fluid ounce size bottle, includes hardener.

Features and Benefits

OPTEX® Color-Changing Technology, applies pink and dries green
Flowable and easy to use
Ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections
Superior adhesion to galvanized steel and aluminum
Easy sanding
No shrinkage

Video

Recommended Substrates

Approved substrates:
- Sanded Body Filler
- Steel
- Fiberglass
- Aluminum
- Galvanized Steel
- Most Rigid to Semi-Rigid Plastics
- Sanded OEM Paint
NOTE: For flexible plastics, use POLY-FLEX™ Flexible Glazing Putty

Mixing

Place the desired amount of material on a clean, non-fibrous surface. Knead
the cream hardener before use
Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle)
Puddles larger than 4” (10 cm) in diameter will require additional hardener
Mix thoroughly until a uniform color is achieved
Approximate setting time is 4-5 minutes @ 72°F (22°C)

Tech Specs

Appearance: Pink thixotropic liquid
VOC: Refer to Section 9 of the Safety Data Sheet
Relative Density: Refer to Section 9 of the Safety Data Sheet
Setting Time: 4-5 minutes
Sand Time: 15-18 minutes
Max. Recommended Thickness (sanded): 1/8 inch (3mm)
Note: Properties are typical values and should not be considered as sales specifications. Physical testing performed @ ~72°F (22°C) / 75% RH unless otherwise noted
Tech Data Sheet: Click here
SDS: Click here
Evercoat Optex Family Brochure: Click here

Safety

Read all directions and warnings prior to using Evercoat® products. Safety Data Sheets can be found online at www.evercoat.com
Never return mixed filler to can.
Keep the container closed and store in a cool dry place.
Use with Evercoat® Cream Hardener Only!
Click here for Safety Data Sheet

SMSDistributors Expert Notes

Evercoat Z‑Grip Glaze OPTEX® Putty is one of the most versatile and technician‑friendly finishing putties in the OPTEX® lineup. Its flowable consistency makes it ideal for skim coating, filling pinholes, grind marks, low spots, and surface imperfections that remain after body filler shaping. The patented OPTEX® color‑change technology is a major advantage — turning from pink to a light blue‑gray when properly catalyzed and ready to sand — eliminating guesswork and helping technicians maintain consistent repair quality.

Because Z‑Grip Glaze OPTEX® offers superior adhesion to galvanized steel, aluminum, steel, fiberglass, rigid to semi‑rigid plastics, and sanded OEM paint, it integrates seamlessly into modern collision repair workflows. Its tack‑free, no‑shrink formula ensures a stable repair surface that won’t map through primer or topcoat. For best results, apply thin layers, avoid heavy applications, and finish with proper sanding progression (180 → 220–320 grit) before priming.

About SMSDistributors

SMSDistributors.com supplies professional‑grade Evercoat, Parker LORD Fusor®, and Indasa Abrasives products to collision centers, OEM repair facilities, restoration shops, and industrial users nationwide. We provide fast shipping, expert product knowledge, and deep experience across all major automotive refinishing brands.

Our team specializes in high‑performance surface preparation products — including fillers, putties, primers, adhesives, and abrasives — ensuring technicians have the right materials for every stage of repair, fabrication, or finishing.