Evercoat Z-Grip OPTEX Body Filler Plus Hardener, 100382

$55.00
Save $13.95

Product Overview

Evercoat Z-GRIP® OPTEX® Body Filler (100382) is an advanced clog-free, lightweight body filler with patented OPTEX® Color-Changing Technology. There’s no second guessing; once mixed with Evercoat® Cream Hardener, OPTEX® changes from pink to green indicating the repair is ready to sand.

Formulated for superior adhesion to galvanized steel, bare steel, and aluminum. Features easy sanding, non-clogging formula and smooth spreading.

Z-GRIP® OPTEX® is a part of the METALWORKS® System with a guarantee that the repair will maintain the O.E.M. corrosion warranty on original factory corrosion protected sheet metal and galvanized sheet metal when used in accordance with the application instructions.

Available in 1 gallon size container containing 0.8 gallons (3L) of product, hardener included.

Features and Benefits

OPTEX® Color-Changing Technology, applies pink and dries green
Lightweight
Superior adhesion to galvanized steel, bare steel, and aluminum
Easy sanding
Non-clog formula
Smooth spreading

Videos

Recommended Substrates

Approved substrates:
- Cold Rolled Steel
- Aluminum
- SMC
- Galvanized Steel
- Fiberglass
NOTE: For structural repairs prone to high degrees of stress and flexibility, use a fiber reinforced filler such as Evercoat® Everglass®, Kitty Hair® or Fiber Tech®

Mixing

Stir the filler before using. Knead the cream hardener
Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle)
Puddles larger than 4” (10 cm) in diameter will require additional hardener
Mix thoroughly until a uniform color is achieved
Approximate setting time is 5-6 minutes @ 72°F (22°C)

Tech Specs

Appearance: smooth light pink paste
VOC: Refer to Section 9 of the Safety Data Sheet
Relative Density: Refer to Section 9 of the Safety Data Sheet
Setting Time: 5-6 minutes
Sand Time: 20 minutes
Max. Recommended Thickness (sanded): 1/4 inch (6mm)
Note: Properties are typical values and should not be considered as sales specifications. Physical testing performed @ ~72°F (22°C) / 75% RH unless otherwise noted
Tech Data Sheet: Click here
SDS: Click here
Evercoat Optex Family Brochure: Click here

Safety

Read all directions and warnings prior to using Evercoat® products. Safety Data Sheets can be found online at www.evercoat.com
Never return mixed filler to can.
Keep the can closed and store in a cool dry place.
Use with Evercoat® Cream Hardener Only!
Click here for Safety Data Sheet

SMSDistributors Expert Notes

Evercoat Z‑Grip OPTEX® is one of the most technician‑friendly fillers in the OPTEX® family, especially for shops that want fast, predictable sanding readiness without guesswork. The color‑change technology is a major advantage — turning from pink to green when properly catalyzed and ready to sand — which helps reduce rework and improves repair consistency across different technicians and shifts.

Because Z‑Grip OPTEX® is lightweight, clog‑free, and formulated for superior adhesion to galvanized steel, bare steel, aluminum, SMC, and fiberglass, it performs exceptionally well on modern vehicle substrates. Its smooth spreading and easy sanding characteristics make it ideal for everyday collision repairs, while its inclusion in the METALWORKS® System ensures corrosion‑warranty compliance when used according to Evercoat’s instructions.

For best results, keep repair areas small, use proper feather‑edging technique, and finish with a premium Evercoat polyester putty to minimize primer surfacer usage and achieve a high‑quality final finish.

About SMSDistributors

SMSDistributors.com supplies professional‑grade Evercoat, Parker LORD Fusor®, and Indasa Abrasives products to collision centers, OEM repair facilities, restoration shops, and industrial users nationwide. We provide fast shipping, expert product knowledge, and deep experience across all major automotive refinishing brands.

Our team specializes in high‑performance surface preparation products — including fillers, putties, primers, adhesives, and abrasives — ensuring technicians have the right materials for every stage of repair, fabrication, or finishing.