Evercoat Light Speed Optex Premium Lightweight Filler Plus Hardener, 100390

Product Overview:

Evercoat Light Speed® Optex® Premium Lightweight Filler (100390) is an elite, dual cure autobody filler delivering unparalleled sanding qualities through Evercoat’s patented EcoResin™ technology. 

Its cure time can be accelerated to just 3–4 minutes with a UV lamp, dramatically improving repair efficiency. The non-sag formula offers excellent filling properties while eliminating the need for finishing putty and featuring Optex® color changing technology from pink to a light gray-green for precise application timing. Part of the Metalworks® system. 

Available in 1 gallon size container containing 0.8 gallons (3L) of product, hardener included.

Features and Benefits:

• OPTEX® color changing technology for precise application timing
• Unique dual-cure system
• 3min ultra-fast UV cure time (with lamp/20min without)
• Industry leading sanding & clog-free formula
• Industry's best spreading & ultra smooth finish
• Virtually eliminates pinholes
• 500+ Hours Corrosion Resistance (ASTM B117)
• Industry-leading adhesion to majority of substrates including OEM paint

Video:

Recommended Substrates:

• Approved substrates:
  • Steel
  • Stainless Steel
  • Galvanized Steel
  • Aluminum
  • SMC
  • Silicon Bronze Welds
  • Fiberglass
  • Sanded OEM Paints
• NOTE: For structural repairs prone to high degrees of stress and flexibility, use a fiber reinforced filler such as Evercoat® Everglass®, Kitty Hair® or Fiber Tech®

Mixing:

• Stir the filler before using. Knead the cream hardener
• Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle)
• Puddles larger than 4” (10 cm) in diameter will require additional hardener
• Mix thoroughly until a uniform color is achieved
• Approximate setting time is 5-6 minutes @ 72°F (22°C)

Tech Specs:

• Appearance: Pink paste
• VOC: Refer to Section 9 of the Safety Data Sheet 
• Relative Density: Refer to Section 9 of the Safety Data Sheet
• Working Time: 5-6 minutes
• Sand Time:
  • 30 - 40 minutes without UV/LED Cure
  • 3 - 4 minutes with UV/LED Cure 
  • Note: Allow minimum of 45 minutes sanding time over silicon bronze welds if not cured with UV Curing Light
• Max. Recommended Thickness (sanded): 1/4 inch (6mm)
• Note: Properties are typical values and should not be considered as sales specifications. Physical testing performed @ ~72°F (22°C) / 75% RH unless otherwise noted
• Tech Data Sheet: Click here
• SDS: Click here

Safety:

• Read all directions and warnings prior to using Evercoat® products. Safety Data Sheets can be found online at www.evercoat.com
• Never return mixed filler to can.
• Keep the can closed and store in a cool dry place.
• Use with Evercoat® Cream Hardener Only!
• Click here for Safety Data Sheet

** This item is considered a Hazardous Materials (HAZMAT) and must be handled in accordance with all applicable federal, state, and international regulations. Item ships UPS Ground ONLY**