Cart 0
Dura-Block Air Force 1/4" Hi-Speed Angle Die Grinder, AF2001, 2
Dura-Block Air Force 1/4" Hi-Speed Angle Die Grinder, AF2001
Dura-Block Air Force 1/4" Hi-Speed Angle Die Grinder, AF2001, 3

Dura-Block Air Force 1/4" Hi-Speed Angle Die Grinder, AF2001

  • Save $10.95

Dura-Block Logo

Note: Very limited number of these tools are in stock. Only product available will be allowed in cart.

Product Overview:

Dura-Block Air Force Professional Series 1/4" Hi-Speed Angle Die Grinder (AF2001) is lightweight and compact. Designed for those hard to reach spots. High performance makes it great for professional shop, recreational and home use.

The angle design makes it perfect for cleaning gasket surfaces, porting, grinding, sanding, polishing and other wood and metal work.

Features a 1/4" precision collet, polished aluminum handle and safety trigger. Use with a 1/4" NPT air inlet, air consumption is on average 3 CFM.

Features and Benefits:

  • Lightweight and compact
  • Designed for hard to reach spots
  • Perfect for cleaning gasket surfaces, porting, grinding, sanding, polishing and other wood and metal work
  • 1/4" precision collet
  • Polished aluminum handle
  • Safety trigger

Specifications:

  • Length: 6.25"
  • Free Speed: 20,000 RPM
  • Collet Size: 1/4"
  • Pressure: 90 PSI (6.2 bar)
  • Average Air Consumption: 3 CFM
  • Air Inlet: 1/4" NPT
  • Weight : 0.99 LBS
  • Warranty: manufacturers 1 year limited warranty

Abrasives:

Be sure to use with abrasives with a rating above 24,000 RPM.

Air Supply:

Use with a minimum pressure of 30PSI with 6CFM available air. An air compressor of at least one horsepower with 4 CFM delivery at 90 PSIG (6.2 bar), with an air tank with a minimum of 12 gallons capacity is required.

Lubrication:

Many times air tools that are believed to be defective or performing poorly are often found to be only dirty. Because these tools use air to operate, they also have a tendency to accumulate moisture, dust and dirt inside the tool motor. Usually cleaning and oiling with a proper solvent is all that is necessary to bring the tool back to near original performance. Daily before using, uncouple air hose and pour a liberal quantity of gum solvent oil (WD40 is recommended) into the air inlet. Connect air hose and run briefly to clean internal gum deposits and clean the air motor. Use SAE 10 non-detergent oil, marvel air tool oil or equivalent for normal lubrication.