RUPES 5" D-A Fine Yellow Microfiber Pad for LRH15, LRH12E, LTA125 & LK900 Tools, 9.MF130M
Product Overview:
RUPES 5" (135mm) D-A Fine Yellow Microfiber Pad for Random Orbital & Gear-Driven Tools (9.MF130M) is designed for the removal of moderate defects, swirls, haze and holograms on fully cured paint using BigFoot dual-action random orbital and gear-driven polishers such as RUPES BigFoot LRH15, LRH12E, LTA125 and LK900 Mille tools with a 5" (125mm) backing plate.
Specialized microfiber material bonded to a semi-flexible foam backing allow for better control and contouring over varied panel shapes with an ideal balance of cutting and finishing ability.
Combined with RUPES D-A Fine Compound, the D-A Fine Microfiber Pad delivers quick removal of moderate defects and a high degree of finish quality on most paint systems.
Diameter is 5" (135mm), thickness is 0.59" (15mm). Additional D-A microfiber pad styles and sizes available.
Sold one pad per package.
Features and Benefits:
- Designed for the removal of moderate defects, swirls, haze and holograms on fully cured paint
- For use with BigFoot dual-action random orbital and gear-driven polishers such as LRH15, LRH12E, LTA125 and LK900 Mille tools with a 5" (125mm) backing plate
- Constructed of specialized microfiber material bonded to a semi-flexible foam backing allow for better control and contouring over varied panel shapes
- Provides an ideal balance of cutting and finishing ability
- Use with RUPES D-A Fine Compound to deliver quick removal of moderate defects and leave a high degree of finish quality
Tips:
- Prime the pad by applying a thin, even layer of polish to the face before first use
- Reload the pad with small amounts of polish, typically only a few drops; oversaturating can lead to diminished performance
- Clean pads frequently during use with compressed air, a vacuum, or RUPES Claw Pad Tool to maintain consistent performance
- After use, clean with warm water and a mild soap, rinse well, allow to air dry
- Apply up to 30-45 second cycle time in an area no larger than six times the pad diameter
- Best for use on factory applied paints; not recommended for use on fresh paint
- Not recommended for use with rotary polishers
More Info About RUPES D-A Microfiber Pads:
THREE LEVELS OF CUTTING POWER
Three levels of cutting aligned with the RUPES blue, yellow and white color-coded system. Each pad features unique foam materials, profiles, and microfiber fabric tuned to deliver a specific range of cut and finish. From extreme cutting, to light cutting and finishing, the D-A Microfiber family delivers. Squared edged on all three grades and all sizes may appear simple, but this profile was specifically chosen to maximize the cutting performance of the pads on D-A tool movements.
THREE PURPOSEFULLY DESIGNED SIZES AVAILABLE
Three sizes available to support full size tools like the LHR15, LHR21, LK900E and small tools like the LHR75 series. Each pad is specifically sized slightly larger than the compatible backing plate to provide edge protection during use. High-performance fabrics. The face material for each pad was developed to deliver the highest quality results possible for it's given performance range including tweaks to fiber length, density, and denier. Each foam is at a specific thickness to translate the desired level of tool movement to the surface.
METALLIC FILM FLOW PACK
The metallic film flow packing ensures excellent mechanical properties against accidental piercing and ripping. The new flow pack guarantees a high level of protection for the foam pads to preserve the original characteristics against UV, dust and humidity.
Learn more, download the RUPES D-A Microfiber flyer PDF here.
Videos: