Epifanes Nautiforte Topside Paint, #NF24 Light Oyster, 750ml, NF24.750
Air shipping is not available; please select ground or discount shipping at checkout.
Product Description:
Epifanes Nautiforte #NF24 Light Oyster, 750ml (NF24.750)
is a high‑gloss, non‑yellowing one‑component topside coating formulated with siliconized alkyd resins for exceptional long‑term gloss retention, minimal dirt pickup, and outstanding weather durability. Nautiforte applies easily at a wide range of temperatures and provides excellent hiding power due to its high‑quality pigment blend.
Suitable for interior and exterior use above the waterline, Nautiforte can be applied directly to well‑degreased and sanded fiberglass, existing one‑component systems, and thoroughly sanded two‑component polyurethane. For bare wood, steel, fiberglass, and aluminum, apply the appropriate primer first. Nautiforte is available in three bright, clean colors: Ultra White, Light Oyster, and Alpine White.
Download the Epifanes Nautiforte technical data sheet here.
Features & Benefits
- High‑gloss, non‑yellowing finish
- Long‑lasting gloss retention activated by UV exposure
- Excellent flow and easy application by brush, roller, or spray
- High hiding power from premium pigments
- Quick drying with minimal dirt retention
- Suitable for wood, steel, aluminum, and fiberglass with appropriate primer
- Compatible with existing one‑ and two‑component systems
- Available in three bright light colors
Videos
Technical Information
| Type | Oxidative‑drying one‑component yacht coating |
| Base | Siliconized alkyd resin |
| Gloss | High gloss |
| Color | #NF24 Light Oyster |
| Density | Approx. 1.20 g/cm³ |
| Viscosity | 35 sec ISO‑cup 6mm |
| Solids Content | 55% ± 2 (vol.) |
| VOC Level | 307 g/L |
| Packaging | 750ml |
| Shelf Life | Approx. 3 years (41–86°F storage) |
| Recommended Film Thickness | 2.5–3 mil wet = 1.5 mil dry |
Drying Times
| 50°F | 59°F | 68°F | 77°F | |
|---|---|---|---|---|
| Dust‑Dry | 3 hours | 2 hours | 1 hour | 45 minutes |
| Sandable / Recoatable | 36 hours | 24 hours | 18 hours | 12 hours |
Drying times are based on 65% relative humidity and 1.5 mil dry film thickness. Poor ventilation or thicker films will extend drying time. Do not apply wet‑on‑wet.
Application Conditions
- Temperature: 47–86°F
- Relative humidity: 50–85%
- Apply by brush, roller, or spray
- Do not apply in direct sunlight or strong wind
- Surface temperature must be within 38°F of paint temperature
Spray Application Guidelines
| Thinning | Nozzle | Pressure | Viscosity |
|---|---|---|---|
| 5–15% | 1.2–1.5 mm | 30–37 psi | 20–22 sec DIN‑cup 4mm |
Surface Preparation
| Substrate | Preparation |
|---|---|
| Bare FRP | Clean with Epifanes Fiberglass Prep Cleaner; sand 220 grit. |
| Bare Wood | Clean, dry, degrease; sand 220 grit. |
| Bare Steel | Remove corrosion; degrease; sand 60 grit. |
| Aluminum | Prime with Epifanes Washprimer AQ (do not sand). |
| Existing Paint | Clean, degrease with Epifanes Spray Thinner; sand 220 grit. |
Appropriate Primers
- Epifanes Multi Marine Primer
- Epifanes Washprimer AQ (new aluminum)
Coverage
Approx. 150 ft² per liter at 1.5 mil dry film thickness. Practical coverage varies with surface condition and application technique.
System Build‑Up
- Sand each primer coat with 220 grit before finishing coats
- Apply 3 full‑bodied coats of Epifanes Nautiforte
- Lightly sand between coats with 320 grit
Recoatability with Other Epifanes Products
- Epifanes Mono‑urethane Yacht Paint
- Epifanes Non‑Skid Deck Coating
- Epifanes Satin Finish
- Epifanes Yacht Enamel
- Epifanes Flat Black
- Epifanes Waterline Paint
SMSDistributors Expert Notes
- Non‑yellowing formula for long‑term color stability
- Gloss retention activated by UV exposure, provides a very high gloss finish
- Excellent flow and leveling for a smooth finish
- High hiding power from premium pigments
- Versatile substrate compatibility, apply over many existing coatings or bare substrates with the appropriate primer
Category
Epifanes > Topcoats & Yacht Paints > Nautiforte