MAS Epoxies 2:1 Epoxy Calibrated Pump Set, 30-016
SORRY, OUT OF STOCK - BACK ORDERED TILL AUGUST 2020
Take the mess and guesswork out of your next epoxy project with MAS Epoxies 2:1 Calibrated Pump Kit!
Simple and easy to use, each full pump stroke automatically dispenses the appropriate amount of resin and hardener for the perfect 2:1 mixing ratio every time!
Designed for use with MAS Epoxies Advanced Non-Blushing 2:1 Epoxy Resin & Hardeners, compatible with all size kits up to 5 gal.
Features & Benefits:
- Designed for use with MAS Epoxies Advanced Non-Blushing 2:1 Epoxy Resin & Hardeners
- Simple and easy to use with no mess
- Color coded pump heads
- Automatically pumps appropriate amount of resin and hardener for a perfect 2:1 mix ratio
- Resin Pump = 8cc Output
- Hardener Pump = 4cc Output
Storage - Pumps may be left attached during storage. Store resins and hardeners in a dry location at room temperature. Do not allow to sit on cement floor. Prevent containers from tipping. Cover pumps with plastic wrap to prevent air & dirt from going into nozzle.
Cold Weather - Cold temperatures make the viscosity of epoxy resin and hardeners increase, and may require more force to pump thicker materials. Excessive force may also cause the pump to break. Dispensing resin and hardener above 60°F is recommended for best dispensing. In cooler temperatures, warming the containers will decrease viscosity and make product dispense easier.
Important Facts About Epoxies - Adding more hardener does not make epoxy set faster, it throws off the mix ratio and it will not cure properly. Do not adjust required mix ratios or tamper with the calibration of pumps.