MAS Woodzilla 2-Part Epoxy, 185ml, 35-130

  • $20.75
  • Save $5.24


MAS Epoxies Logo

Product Overview:

Introducing new MAS Woodzilla 2-Part Epoxy Adhesive (35-130), a wood colored, fast-curing, translucent, thickened epoxy that can be used for bonding, sealing and filling applications on all woods. After cure, Woodzilla can be painted, sanded, drilled, filed, tapped, sawed and machined!

Woodzilla is extremely convenient and easy-to-use for small projects. It saves time as it mixes in tip while dispensing and fits in a standard caulking gun. Thickened to not drip or sag when working on vertical surfaces. For large projects, consider using MAS Epoxy 2:1 Non-Blushing Epoxy System and Wood Flour, info here.

Woodzilla is formulated to be versatile in the type of materials it bonds and seals while offering very high flexibility and enormous strength. Woodzilla is waterproof and demonstrates excellent resistance to salt & fresh water, mild acids, caustics, cleaners, fuel oil and gasoline.

MAS Woodzilla is great for beginners, loved by professionals.

NOTE: Cartridges should be heated to or above 90°F before using to improve product flow. Contains 185ml (6.26 fl oz) total product, cartridge is partially filled to allow for proper 2:1 mix.

Features and Benefits:

  • Wood color
  • Fits standard caulking guns for easy dispensing
  • Will not drip or sag when working on vertical surfaces
  • Sets in ~30 minutes
  • Paint, sand, drill, file and machine after cure
  • Waterproof and resistant to mild acids, caustics, cleaners, fuel oil and gasoline
  • High elongation (flexibility) with enormous strength
  • Includes 2 static mixing tips that may be trimmed to suit

Applications:

  • Adhesive - bonds to all types of woods
  • Sealant - seals boat hulls, boat seams and boat decks, doors and windowsills
  • Filler - fills holes, window seams, deck repair, furniture and much more

Properties*:

 Property Value Test Method
Color Buff Visual
Hardness, Shore D 80 ASTM D2240
Tensile Strength, psi 6,000 ASTM D638
Tensile Elongation, psi 325,000 ASTM D638
Modulus, % 8.5 ASTM D638
Compressive Strength, psi 9,000 ASTM D638
Flexural Strength, psi 10,500 ASTM D790
Flexural Modulus, psi 307,000 ASTM D790
Tensile Adhesion,Wood, psi 1,420 ASTM D4541
Tensile Adhesion,Aluminum, psi 1,840 ASTM D4541
Tensile Adhesion,G10, Laminate, psi 2,090 ASTM D4541
Mix Ratio 2A:1B Calculated
Gel Time @ 25°C, 150g mass, min. 30-35 ASTM D2471
Vertical Sag Resistance, inch 1-2 ASTM D2471
Size, ml 185 Calculated

Directions for Use*:

Clean surface of dirt, loose paint and grease with product such as Bio-Solv. Remove nut and nose plug from top of cartridge. Cartridges should be heated to or above 90°F before using to improve product flow. Insert cartridge into caulk gun. For best results, use caulk gun with a 12:1 ratio or higher. Dispense small amount of material making sure that parts A & B are flowing from both sides of the nozzle. Attach included static mix injector nozzle to cartridge. Tighten firmly. Trim nozzle tip to deliver desired bead size. Material should flow with uniform color. Use in areas with temperatures 55 degrees Fahrenheit or higher. 

Tips*:

Woodzilla mixes better at warmer temperatures than colder temperatures; if working in cooler conditions, place cartridges in room temperature environment or warm to or above 90°F to ease application. To smooth out work, use lacquer thinner or denatured alcohol. Static mixing tip may be trimmed to ease application. If not using static mix injector nozzle, use a small putty knife to mix thoroughly to mix, apply and sculpt.

*This information is provided as a guide only; always check product label and manufactures data sheets for most recent application instructions.

Data Sheets:

Related Products: