RUPES 3" (75mm) x 0.28" (7mm) Solid Foam Interface Pad, 2-Pack, 980.013

  • $11.00
  • Save $3.49


RUPES Logo

Product Overview

The RUPES 3" (75mm) x 0.28" (7mm) Solid Foam Interface Pad, 2-Pack (980.013) is a soft sanding interface designed to add flexibility and conformity between the sander backing plate and abrasive disc.

The 7mm (approximately 0.28") foam interface allows the abrasive to better follow curved, contoured, and irregular surfaces while maintaining a relatively low-profile sanding setup.

Compared with a thicker interface pad, the 7mm design provides a useful option when additional abrasive conformity is desired without adding as much cushioning or flexibility to the sanding system.

The compact 3" (75mm) diameter is particularly useful for spot repair, smaller panels, localized sanding, tight contours, curves, and other detailed surface-finishing applications.

The solid / no-hole configuration is intended for applications where through-pad dust extraction is not required.

The 980.013 can be used with compatible 3" (75mm) grip / hook-and-loop sanding systems using an appropriately sized backing plate and abrasive attachment.

Sold 2 interface pads per package.


Features & Benefits

  • 3" (75mm) diameter
  • 7mm (approximately 0.28") thickness
  • Soft foam construction adds flexibility between the backing plate and abrasive
  • Helps improve abrasive conformity on curved and contoured surfaces
  • Lower-profile interface compared with thicker 12mm foam interface pads
  • Solid / no-hole configuration
  • Grip / hook-and-loop attachment
  • Compact 3" size is useful for spot repair and localized sanding
  • Suitable for compatible 3" (75mm) professional sanding systems
  • 2 interface pads per package

Why Use a Foam Interface Pad?

A foam interface pad is installed between the sander backing plate and abrasive disc to add flexibility to the sanding system.

The foam layer allows the abrasive to follow surface contours and variations more easily than when the abrasive is mounted directly to a firmer backing plate.

This can be useful when sanding curved panels, contours, transitions, and other surfaces where additional abrasive conformity is desired.


7mm Interface for Increased Control

The 7mm thickness provides a relatively low-profile interface between the backing plate and abrasive.

This makes the 980.013 a useful option when additional flexibility and conformity are desired while retaining a firmer sanding feel than a thicker interface arrangement.

For applications where greater cushioning and conformity are preferred, the thicker RUPES 980.014 12mm interface pad provides another option in the same 3" (75mm) diameter.


Compact 3" Interface for Detail Sanding

The compact 3" (75mm) format provides excellent control for localized sanding applications where a larger 5" or 6" sanding system may cover more surface than necessary.

The combination of a small working diameter and flexible foam interface makes the 980.013 particularly useful for spot-repair areas, smaller panels, curves, contours, transitions, and detailed surface preparation.


Solid / No-Hole Interface Design

The RUPES 980.013 features a solid foam construction without vacuum holes.

The solid interface provides continuous foam support between the backing plate and abrasive and is suited to applications where through-pad dust extraction is not required.

For vacuum sanding applications, select an appropriately sized RUPES interface pad with a compatible dust-extraction hole configuration.


Technical Specifications

  • Brand: RUPES
  • Part Number: 980.013
  • Product Type: Soft Foam Sanding Interface Pad
  • Diameter: 75mm (3")
  • Thickness: 7mm (approximately 0.28")
  • Hole Configuration: Solid / No Holes
  • Attachment: Grip / Hook-and-Loop
  • Primary Purpose: Increased Abrasive Conformity
  • Package Quantity: 2 Interface Pads

Compatible Sanding Systems

The RUPES 980.013 is designed for compatible professional 3" (75mm) grip sanding systems using an appropriately sized backing plate and abrasive attachment.

  • Compatible 3" (75mm) RUPES sanding systems
  • Compatible professional 3" (75mm) sanding systems using grip / hook-and-loop backing plates
  • Solid-abrasive sanding applications where through-pad vacuum extraction is not required

Compatibility Note: Tool diameter alone does not guarantee compatibility. Verify the backing plate diameter and grip / hook-and-loop attachment before use.


SMSDistributors Expert Notes

  • The 980.013 is a good choice when some additional abrasive conformity is needed without adding the cushioning of a thicker 12mm interface pad.
  • The compact 3" (75mm) diameter makes this interface particularly useful for spot repair, localized sanding, smaller panels, contours, and other detailed finishing work.
  • The 7mm thickness retains a relatively direct sanding feel while still adding a flexible foam layer between the backing plate and abrasive.
  • For greater cushioning and conformity, consider the thicker RUPES 980.014 3" x 12mm Solid Foam Interface Pad.
  • The solid configuration is best suited to sanding applications where through-pad vacuum extraction is not required.
  • Always verify backing plate diameter and attachment compatibility before using the interface with another manufacturer's sanding system.

Frequently Asked Questions (FAQ)

What does the RUPES 980.013 foam interface pad do?

The 980.013 adds a 7mm flexible foam layer between the backing plate and abrasive, allowing the abrasive to better conform to curved, contoured, and irregular surfaces.

What size is the RUPES 980.013?

The interface pad measures 3" (75mm) in diameter and 7mm (approximately 0.28") thick.

Does the RUPES 980.013 have vacuum holes?

No. The 980.013 has a solid / no-hole configuration.

Where is the foam interface pad installed?

The interface pad installs between the sander backing plate and abrasive disc.

Why use a 3" foam interface pad?

The compact 3" (75mm) diameter provides additional control for spot repair, localized sanding, smaller surfaces, curves, contours, and other detailed sanding applications.

What is the difference between the RUPES 980.013 and 980.014?

Both are 3" (75mm) solid foam interface pads. The 980.013 is 7mm thick, while the 980.014 is 12mm thick. The thinner 7mm version provides a lower-profile interface, while the thicker 12mm version provides additional cushioning and conformity.

Can the RUPES 980.013 be used with other brands of sanders?

It may be used with compatible professional 3" (75mm) sanding systems when the backing plate diameter and grip / hook-and-loop attachment are appropriate.

How many interface pads are included?

Each package contains 2 RUPES 980.013 foam interface pads.


About SMSDistributors

SMSDistributors.com is an authorized master distributor for RUPES and other professional finishing brands. We supply abrasives, sanding tools, backing pads, interface pads, dust-extraction equipment, polishers, polishing accessories, coatings, and professional finishing products to automotive, marine, woodworking, composite, and industrial customers nationwide.

Orders ship from our Massachusetts warehouse, and our team provides knowledgeable support for selecting compatible sanders, backing pads, interface pads, abrasives, and professional finishing systems.


Category

RUPES → Sander Accessories → Foam Interface Pads → 3" (75mm) Solid Interface Pads