RUPES 5" (125mm) x 0.28" (7mm) Solid Foam Interface Pad, 2-Pack, 980.038
Product Overview
The RUPES 5" (125mm) x 0.28" (7mm) Solid Foam Interface Pad, 2-Pack (980.038) is a soft sanding interface designed to add flexibility and conformity between the sander backing pad and abrasive disc.
The 7mm (approximately 0.28") foam interface allows the abrasive disc to better adapt to curves, contours, and different panel shapes, helping create a more consistent sanding finish.
The 980.038 features a solid / no-hole configuration for sanding applications where through-pad dust extraction is not required. The continuous foam surface provides support across the full diameter of the interface pad.
Compared with a thicker 12mm interface pad, the 7mm design provides a lower-profile foam layer for applications where additional abrasive conformity is desired while retaining a relatively direct sanding feel.
The 5" (125mm) diameter makes the 980.038 a versatile interface pad for professional automotive, marine, woodworking, composite, and other surface-finishing applications.
Sold 2 interface pads per package.
Features & Benefits
- 5" (125mm) diameter
- 7mm (approximately 0.28") thickness
- Solid / no-hole configuration
- Soft foam construction adds flexibility between the backing pad and abrasive
- Helps the abrasive adapt to different panel shapes
- Improves abrasive conformity on curved and contoured surfaces
- Helps promote more consistent sanding results
- Lower-profile interface compared with the thicker 12mm version
- Designed and manufactured in-house by RUPES
- 2 interface pads per package
Why Use a Foam Interface Pad?
A foam interface pad installs between the sander backing pad and abrasive disc to add flexibility to the sanding system.
The foam layer allows the abrasive to adapt more easily to curves, contours, and variations in panel shape than when the abrasive is mounted directly to a firmer backing pad.
This added conformity can help provide more consistent contact between the abrasive and work surface during finishing and surface-preparation applications.
7mm Interface for Added Conformity & Control
The 7mm thickness provides a relatively low-profile interface between the backing pad and abrasive.
This makes the 980.038 a useful option when additional flexibility and conformity are desired while retaining a more direct sanding feel than a thicker foam interface.
For applications where greater cushioning and conformity are preferred, the thicker RUPES 980.044 5" (125mm) x 12mm Solid Foam Interface Pad provides another option in the same 125mm diameter.
Solid / No-Hole Interface Design
The RUPES 980.038 features a solid foam construction without vacuum holes.
The solid interface provides continuous foam support between the backing pad and abrasive and is suited to sanding applications where through-pad dust extraction is not required.
For applications requiring through-pad vacuum extraction, the RUPES 980.039 5" (125mm) x 7mm Multi-Hole Foam Interface Pad provides the same diameter and thickness with an 8+8+1 hole configuration.
Technical Specifications
- Brand: RUPES
- Part Number: 980.038
- Product Type: Soft Foam Sanding Interface Pad
- Diameter: 125mm (5")
- Thickness: 7mm (approximately 0.28")
- Hole Configuration: Solid / No Holes
- Primary Purpose: Increased Abrasive Conformity
- Package Quantity: 2 Interface Pads
Choosing the Right RUPES 5" Foam Interface Pad
RUPES offers 5" (125mm) foam interface pads in different thicknesses and hole configurations, allowing the interface to be selected according to the sanding application.
- 980.038 – 7mm Solid: Lower-profile foam interface with no vacuum holes
- 980.039 – 7mm Multi-Hole: Lower-profile interface with 8+8+1 holes for compatible multi-hole sanding systems
- 980.044 – 12mm Solid: Thicker solid interface for additional cushioning and conformity
- 980.043 – 12mm Multi-Hole: Thicker interface with 8+8+1 holes for compatible multi-hole sanding systems
The 980.038 is the 7mm solid version and is best suited to applications where added conformity is desired without through-pad dust extraction.
SMSDistributors Expert Notes
- The 980.038 is our choice when additional abrasive conformity is needed but a relatively thin, solid interface is preferred.
- The 7mm thickness adds flexibility between the backing pad and abrasive without providing as much cushioning as the thicker 12mm version.
- The solid configuration provides continuous foam support and is appropriate for applications where through-pad vacuum extraction is not required.
- Interface pads can be particularly useful when sanding curves, contours, and panel transitions where a rigid abrasive-to-backing-pad setup may not follow the surface as naturally.
- If the sanding system requires through-pad vacuum extraction, choose the 7mm 980.039 multi-hole interface pad instead.
- For greater cushioning and conformity in a solid interface, consider the thicker RUPES 980.044 12mm Solid Foam Interface Pad.
Frequently Asked Questions (FAQ)
What does the RUPES 980.038 foam interface pad do?
The 980.038 adds a 7mm flexible foam layer between the backing pad and abrasive, allowing the sanding disc to better adapt to curves, contours, and different panel shapes.
What size is the RUPES 980.038?
The interface pad measures 5" (125mm) in diameter and 7mm (approximately 0.28") thick.
Does the RUPES 980.038 have vacuum holes?
No. The 980.038 has a solid / no-hole configuration.
Where is the foam interface pad installed?
The foam interface is installed between the sander backing pad and abrasive disc.
Why use a 7mm interface pad?
The 7mm thickness provides added flexibility and abrasive conformity while retaining a relatively low-profile sanding setup.
What is the difference between the RUPES 980.038 and 980.039?
Both are 5" (125mm) x 7mm foam interface pads. The 980.038 is solid with no holes, while the 980.039 uses an 8+8+1 multi-hole configuration for compatible multi-hole sanding systems.
What is the difference between the RUPES 980.038 and 980.044?
Both are solid 5" (125mm) foam interface pads without holes. The 980.038 is 7mm thick, while the 980.044 is 12mm thick.
Can the RUPES 980.038 be used with vacuum sanding?
The 980.038 does not have through-holes for dust extraction. For a compatible vacuum sanding setup, select the appropriate multi-hole RUPES interface pad instead.
How many interface pads are included?
Each package contains 2 RUPES 980.038 foam interface pads.
About SMSDistributors
SMSDistributors.com is an authorized master distributor for RUPES and other professional finishing brands. We supply abrasives, sanding tools, backing pads, interface pads, dust-extraction equipment, polishers, polishing accessories, coatings, and professional finishing products to automotive, marine, woodworking, composite, and industrial customers nationwide.
Orders ship from our Massachusetts warehouse, and our team provides knowledgeable support for selecting compatible sanders, backing pads, interface pads, abrasives, and professional sanding systems.
Category
RUPES → Sander Accessories → Foam Interface Pads → 5" (125mm) Solid Interface Pads