RUPES 6" (150mm) x 0.28" (7mm) Solid Foam Interface Pad, 2-Pack, 981.325

  • $25.50
  • Save $8.99


RUPES Logo

Product Overview

The RUPES 6" (150mm) x 0.28" (7mm) Solid Foam Interface Pad, 2-Pack (981.325) is a soft sanding interface designed to add flexibility and conformity between the sander backing pad and abrasive disc.

The 7mm (approximately 0.28") foam interface allows the abrasive disc to better adapt to curves, contours, and different panel shapes, helping create a more consistent sanding finish.

The 981.325 features a solid / no-hole configuration for sanding applications where through-pad dust extraction is not required. The continuous foam surface provides support across the full diameter of the interface pad.

Compared with a thicker 12mm interface pad, the 7mm design provides a lower-profile foam layer for applications where additional abrasive conformity is desired while retaining a relatively direct sanding feel.

The larger 6" (150mm) diameter provides increased working coverage for professional automotive, marine, woodworking, composite, and other surface-finishing applications.

Sold 2 interface pads per package.


Features & Benefits

  • 6" (150mm) diameter
  • 7mm (approximately 0.28") thickness
  • Solid / no-hole configuration
  • Soft foam construction adds flexibility between the backing pad and abrasive
  • Helps the abrasive adapt to different panel shapes
  • Improves abrasive conformity on curved and contoured surfaces
  • Helps promote better, more consistent sanding results
  • Lower-profile interface compared with the thicker 12mm version
  • 6" diameter provides increased working coverage on larger surfaces
  • Designed and manufactured in-house by RUPES
  • 2 interface pads per package

Why Use a Foam Interface Pad?

A foam interface pad installs between the sander backing pad and abrasive disc to add flexibility to the sanding system.

The foam layer allows the abrasive to adapt more easily to curves, contours, and different panel shapes than when the abrasive is mounted directly to a firmer backing pad.

This added conformity can help provide more consistent contact between the abrasive and work surface during finishing and surface-preparation applications.


7mm Interface for Added Conformity & Control

The 7mm thickness provides a relatively low-profile interface between the backing pad and abrasive.

This makes the 981.325 a useful option when additional flexibility and conformity are desired while retaining a more direct sanding feel than a thicker foam interface.

For applications where greater cushioning and conformity are preferred, the thicker RUPES 981.324 6" (150mm) x 12mm Solid Foam Interface Pad provides another option in the same 150mm diameter.


6" Diameter for Increased Sanding Coverage

The 6" (150mm) diameter provides greater working coverage than smaller 3" and 5" interface pads, making the 981.325 particularly useful when sanding larger panels and surface areas.

The combination of the larger 150mm working diameter and flexible 7mm foam layer provides a useful balance of sanding coverage, flexibility, and surface conformity.


Solid / No-Hole Interface Design

The RUPES 981.325 features a solid foam construction without vacuum holes.

The solid interface provides continuous foam support between the backing pad and abrasive and is suited to sanding applications where through-pad dust extraction is not required.

For applications requiring through-pad vacuum extraction, select an appropriately sized multi-hole RUPES foam interface pad designed for the compatible sanding system.


Technical Specifications

  • Brand: RUPES
  • Part Number: 981.325
  • Product Type: Soft Foam Sanding Interface Pad
  • Diameter: 150mm (6")
  • Thickness: 7mm (approximately 0.28")
  • Hole Configuration: Solid / No Holes
  • Primary Purpose: Increased Abrasive Conformity
  • Package Quantity: 2 Interface Pads

7mm vs. 12mm RUPES 6" Solid Interface Pads

RUPES offers its 6" (150mm) solid foam interface pads in both 7mm and 12mm thicknesses.

  • 981.325 – 7mm: Lower-profile solid foam interface for added conformity while retaining a more direct sanding feel
  • 981.324 – 12mm: Thicker solid foam interface for applications where additional cushioning and conformity are desired

Both versions use the same 150mm diameter and solid / no-hole configuration, allowing the interface thickness to be selected according to the desired sanding feel and surface conformity.


SMSDistributors Expert Notes

  • The 981.325 is our choice when additional abrasive conformity is needed on a 6" sanding system but a relatively thin, solid interface is preferred.
  • The 7mm thickness adds flexibility between the backing pad and abrasive without providing as much cushioning as the thicker 12mm version.
  • The larger 6" diameter provides useful working coverage for bigger panels and surface areas while the foam interface helps the abrasive follow curves and contours.
  • The solid configuration provides continuous foam support and is appropriate for applications where through-pad vacuum extraction is not required.
  • Interface pads are particularly useful when sanding curved panels and transitions where a more rigid abrasive-to-backing-pad arrangement may not follow the surface as naturally.
  • For greater cushioning and conformity in a solid 6" interface, consider the thicker RUPES 981.324 12mm Solid Foam Interface Pad.

Frequently Asked Questions (FAQ)

What does the RUPES 981.325 foam interface pad do?

The 981.325 adds a 7mm flexible foam layer between the backing pad and abrasive, allowing the sanding disc to better adapt to curves, contours, and different panel shapes.

What size is the RUPES 981.325?

The interface pad measures 6" (150mm) in diameter and 7mm (approximately 0.28") thick.

Does the RUPES 981.325 have vacuum holes?

No. The 981.325 has a solid / no-hole configuration.

Where is the foam interface pad installed?

The foam interface is installed between the sander backing pad and abrasive disc.

Why use a 7mm interface pad?

The 7mm thickness provides added flexibility and abrasive conformity while retaining a relatively low-profile sanding setup.

Why choose a 6" foam interface pad?

The larger 6" (150mm) diameter provides increased sanding coverage for larger panels and surface areas while the flexible foam layer helps the abrasive conform to different panel shapes.

What is the difference between the RUPES 981.325 and 981.324?

Both are solid 6" (150mm) foam interface pads without holes. The 981.325 is 7mm thick, while the 981.324 is 12mm thick.

Can the RUPES 981.325 be used with vacuum sanding?

The 981.325 does not have through-holes for dust extraction. For a compatible vacuum sanding setup, select an appropriately sized RUPES multi-hole interface pad instead.

How many interface pads are included?

Each package contains 2 RUPES 981.325 foam interface pads.


About SMSDistributors

SMSDistributors.com is an authorized master distributor for RUPES and other professional finishing brands. We supply abrasives, sanding tools, backing pads, interface pads, dust-extraction equipment, polishers, polishing accessories, coatings, and professional finishing products to automotive, marine, woodworking, composite, and industrial customers nationwide.

Orders ship from our Massachusetts warehouse, and our team provides knowledgeable support for selecting compatible sanders, backing pads, interface pads, abrasives, and professional sanding systems.


Category

RUPES → Sander Accessories → Foam Interface Pads → 6" (150mm) Solid Interface Pads