Epifanes Classic Mahogany Stain, MHS.500
Air shipping is not available.
Product Description:
Epifanes Classic Dutch Mahogany Stain (MHS.500) is specifically designed to penetrate bare mahogany and other fine marine woods.
This quick drying stain renders a beautiful warm, rich reddish-brown mahogany color. Depending on desired finished look, each coat will continue to darken the color of the stain; a maximum of 3 coats may be applied to bare.
Use on both interior and exterior woodwork above the waterline. Re-coatable after only 2 hours at 65°F. Dutch Mahogany Stain is re-coatable with all Epifanes 1 and 2-part varnishes.
It is possible to mix Epifanes Classic Mahogany Stain (maximum 10%) with Epifanes 1 and 2-part varnishes to create a lightly tinted finish for camouflaging color differences in an existing system. Do not thin this product.
Available in 500ml size container. Download Tech Data Sheet here.
Features and Benefits:
- Quick drying, impregnating stain
- Renders a warm, rich reddish-brown mahogany color
- Recoatable after only 2 hours at 65°F
- Use on Mahogany and other fine hardwoods, interior and exterior above the waterline
- Depending on desired finished look, each coat will continue to darken the color of the stain
- Recoatable with all Epifanes 1 and 2-part varnishes
- May be mixed (max 10%) with Epifanes 1 & 2-part varnishes to create a lightly tinted finish for camouflaging color differences in an existing system
Technical Information:
| Type | One-component stain |
| Color | Warm, rich reddish-brown mahogany color |
| Recommended Uses | Specifically formulated for mahogany and fine marine woods, both interior and exterior above the waterline. |
| Container Size | 500 ml |
| Coverage | 50-75 square feet, depending on wood porosity and density |
| Surface Prep | Clean wood and sand with 180 to 220 grit sandpaper. Degrease surface thoroughly with Epifanes Spray Thinner for Paint & Varnish or other suitable degreaser and allow to dry thoroughly; do not use water. |
| Application | Brush or roller, apply in thin coats, moving in direction with the wood grain |
| Drying times at 65F / 65% RH | Recoatable after 2 hours |
| Application Conditions | Temperature should be between 50F. and 85F. during application. Air humidity below 85%. Avoid staining in direct sun or hot conditions. Do not thin. Clean wood and sand with 180 to 220 grit sandpaper. Degrease surface thoroughly with Epifanes Spray Thinner for Paint & Varnish or other suitable degreaser and allow to dry thoroughly; do not use water. |