Epifanes PP Varnish Extra, PPX.2000

  • $165.00
  • Save $64.95


Air shipping is not available.

Product Description:

Epifanes PP Varnish Extra (PPX.2000) is a two-component varnish based on advanced alkyd resin/isocyanate technology to achieve fast drying, quick re-coating and high-buildup. It offers excellent impact, abrasion and chemical resistance.

PP Varnish Extra has a re-coat time as short as 2.5 hours making it ideal for situations where a fast high-build is required.

Use on all types of interior and exterior woods as an insulation base coat, sealer or filling coat for one-component or two-component synthetic or polyester-based varnish systems. 

PP Varnish Extra is an excellent insulating sealer for oily, greasy and vaporous woods such as Teak and Iroco.  

Alone, PP Varnish Extra offers a very high interior gloss retention. For maximum UV resistance in exterior applications, it is recommended to topcoat with two or more coats of Epifanes Clear Gloss Varnish, Epifanes Woodfinish Gloss or Epifanes Polyurethane Clear Gloss. Reduce only with Epifanes Thinner for PP Varnish Extra.

Features and Benefits:

  • Fast drying for high-build
  • Excellent impact and abrasion resistance
  • Use on all types of interior and exterior woods including oily woods like Teak and Iroco
  • Perfect as an insulation base coat, sealer or filling coat prior to 1 & 2 component synthetic or polyester-based varnish systems
  • Re-coating may take place in as little as 2.5 hours if spraying, 5 hours if brushing
  • Apply by brush, roll, conventional air spray and HVLP
  • 2L (0.528 gal) total product (1L base + 1L cure)
  • May be over-coated with Epifanes Clear Gloss VarnishEpifanes Woodfinish Gloss or Epifanes Polyurethane Clear Gloss

Suggested Application & Tips:

Surface Preparation: Bare wood must be free of grease, etc. Degrease with Epifanes Spray Thinner for Paint & Varnish. Do not use water. Sand bare wood with 60 to 80 grit sandpaper along the grain of the wood, and then with 100 to 220 grit sandpaper. Apply with a clean, long-hair, bristle brush of good quality; Epifanes Brushes will bring best results. Re-coating PP Varnish Extra may take place in as little as 2.5 hours if spraying, 5 hours if brushing.

PP Varnish Extra System on Exterior Wood:

# of Coats

Epifanes Product

Epifanes Thinner

Thinning Ratio Dry Time* Abrasive Grit Abrasive Type
1 PP Varnish Extra Thinner for PP Varnish Extra 5-10% Max 24 Hrs 320 Wet
1 PP Varnish Extra Thinner for PP Varnish Extra 5% 24 Hrs 280 Dry
1 PP Varnish Extra Thinner for PP Varnish Extra 0-5% Max 24 Hrs Do not sand Wet
1 PP Varnish Extra Thinner for PP Varnish Extra 0-5% 24 Hrs 360 or finer Wet
2 or more Clear Gloss Varnish Thinner P&V 0-5% 24 Hrs 360 or finer Wet

*Dry Time: if outside of 24 hours, scuff sand before reapplying additional coats.

When a Satin Finish is Desired: Sand last coat of PP Varnish Extra to 220 grit and apply one or more coats of Epifanes Rubbed Effect Interior Varnish. Sand between coats with 320 grit wet/dry abrasive paper. If desired, replace Epifanes Rubbed Effect Interior Varnish with Epifanes Polyurethane Clear Gloss after the fourth coat; sand with 220 grit wet/dry abrasive paper (if top coating with a one-component product) or 320 wet/dry (if top coating with a two-component product). Topcoat with three or more coats of Epifanes Clear Gloss Varnish.

For additional tech info and application instructions, click here.